Skip to product information
1 of 1


Tilemaster- Feather Finish

Tilemaster- Feather Finish

Regular price £39.99 GBP
Regular price Sale price £39.99 GBP
Sale Sold out
Tax included.

Tilemaster Feather is a rapid drying, fast setting, ultra-fine, high polymer patch-repair and smoothing compound developed for internal use on a large variety of substrates prior to the installation of a final floor covering.

Tilemaster Feather has been developed to further improve the surface finish of substrates prior to laying final floor coverings and it is ideal for patching and feathering depressions, trowel marks, ridges, gouges and day-work joints in the sub-floor, as well as for smoothing over screw-heads and joints between sheets of plywood. Tilemaster Feather has outstanding adhesion properties and it is suitable for use on a wide variety of substrates including sand & cement screeds, concrete, existing smoothing and levelling compounds, plywood and existing tiles without the need to prime.

Tilemaster Feather is a genuine “feather edge” product allowing for applications between featheredge and 3mm. The mortar has an open time of approximately 15 minutes at 23°C and when skimmed on absorbent sub-floors will normally be hard enough for floor laying after as little as 15 minutes.

When mixed with 3.85L of water and applied as a scrape coat, an 11kg bag of Tilemaster Feather will cover approximately 50m2 (approximately 10m2 at a 1mm depth)

Pack Sizes


  • Apply From Feather Edge - 3mm
  • Outstanding Bond Strength
  • Install Floor Coverings After As Little As 15 Minutes
Surface / Substrate
  • Floors
  • Internal
  • Dry Areas
  • Underfloor Heating
  • Limited Movement/ Vibration
View full details